- Jaw Plants
- Cone Plants
- Wash Plants
- Screen Plants
- ProScreen & Pro Mighty Mite
- Wash Plant & Pro Wash Master
- Screen Plants & Incline Screens
- Vibrating Grizzly Feeders
- Contractor & Sprint Plants
- Agg Prep Plant
- Belt Feeders
- Load-Out Bunkers, Cold Feeders & Pugmills
- Radial Stackers & Conveyors
- Hydraulic Stabilizing Systems
Pro 5′ x 16′ Three Deck Wash Plant
Pro 5×16 3 Deck Incline Screen:
- 20 HP TEFC with pivot motor base and belt drive.
- 3/8″ PL side walls.
- Huck bolted screen decks, constructed of 4″ x 3″ x 3/8″ angle iron and 3″ x 2″ rectangular tubing, 1⁄2″ x 3″ FB crown bars.
- AR lined discharge lips.
- AR lined feed box.
- Alco high temper isolation springs.
- 100 MM F.A.G. spherical bearings designed for shaker screens.
- Center support tube 9″ with 1⁄2″ wall and 2″ thick flanges.
- FAB TEC cartilage style bearing housings, with heavy duty 1 1/4″ wall.
- Eccentrics with add on weights.
- 10″ WF sub frame 33# with C8″x 13.75# cross members.
- Standard side tension formed clamp bars and 1⁄2″ crown bar rubbers.
Pro 5×16 3 Deck Incline Screen:
- 15 HP TEFC Teco Motor.
- Greasable lower bearing, rubber sealed with bearing spacer for trouble free use.
- Extra thick replaceable wear plates, tube & spiral.
- 100 TPH MAX. CAPACITY material size 3/8″.
36″x25′ Sandscrew:
- 15 HP TEFC Teco Motor.
- Greasable lower bearing, rubber sealed with bearing spacer for trouble free use.
- Extra thick replaceable wear plates, tube & spiral.
- 100 TPH MAX. CAPACITY material size 3/8″.
(3) AR Lined discharge chutes w/ easy access to product conveyor.
(10)Spray Bar Wash System
- Brass “Vee Jet” nozzles, 1⁄2″ spray bars.
- Brass individual gate valves for each spray bars.
- Full length water manifold with inlet pipe and flange.
- Maximum capacity 657 GPM at 40 PSI. Best results are at 450 GPM at35 psi.
- 18″ Walkways both sides of screen, back 48″ platform, skywalk floor, 3″ toe boards, 42″ tubesteel handrails, and access ladder.
Tandem Axle Carrier 16″ WF Beams 50#
- Hutch 9700 series suspension.
- 22,500# Standard forge axles.
- 11:00×22.5 Tires, 10 hole hub piloted wheels.
- Standard 5th wheel plate, brakes, lights, & mud flaps.
Safety guards, sandblasted chassis, rust inhibitor primer, and two finish coats included.
Travel Height14’3″, Operating height 16′,Width 10′.
Axle wt. 26,340#. Pin wt. 13,260#. Total 39,600#.
Options: Feed slurry box with spray bars.