New Fab Tec Agg Prep RIP-RAP & Screening Plant – Self Contained Portable Plant

Price On Request

PRO 42"x17' VIBRATING GRIZZLY FEEDER:

  1. 25 HP TEFC variable speed electric motor drive.
  2. T1 adjustable grizzly bars.
  3. 1/2" side walls with 1/2" AR bolt-in liners
  4. 8" WF cross members on 18" centers.
  5. Alco high temper isolation springs.
  6. 90 MM Torrington YM spherical bearings.
  7. Solid steel machined bearing housings.
  8. 4150 stress proof shafts.
  9. 4140 2"x12" drive gears.
  10. Flow through lubrication, ensuring smooth running and heat dissipation.
  11. All bolts are oversized grade #8 with L9 washers and self locking nuts.

AR LINED GRIZZLY UNDERSIZE CHUTE.

8'x19' 3/4" THICKNESS STEEL PLATE FEED HOPPER WITH 12" WF SUPPORT FRAME FOR HOPPER.

HEAVY DUTY HYDRAULIC DUMP GRIZZLY:

  1. Heavy duty support frame assembly .
  2. 1 1/2" diameter round stock and 1"x7" flat bar formed grizzly bars.
  3. 10 HP electric over hydraulic power package.
  4. Brackets to hold grizzly at two different operating positions.

36"x42' SCREEN FEED CONVEYOR:

  1. 15 HP TEFC Motor.
  2. Vulcanized lagged head pulley and winged type self cleaning tail pulley.
  3. 3 ply 1/4" belting.
  4. Impact idlers in feed area.
  5. Full length formed skirt board.

PRO 5X14 2 DECK INCLINE SCREEN:

  1. 20 HP TEFC with pivot motor base and power and belt.
  2. 3/8" PL side walls, with 3"x2" angle iron reinforcement on edges.
  3. Hutch bolted screen decks, constructed of 5"x3"x3/8" angle iron and 4"x2" rectangular tubing, 1/2"x3" FB crown bars.
  4. AR lined discharge lips.
  5. AR lined feed box.
  6. Alco high temper isolation springs.
  7. 100 MM Torrington spherical bearings specially designed for shaker screens.
  8. Center support tube 9" with 1/2" wall and 2" thick flanges.
  9. FAB TEC designed cartilage style bearing housings, heavy duty with 1 1/4" wall thickness.
  10. Eccentrics with add on weights.
  11. 10" WF sub frame 33# with 8" CL 13.75# cross members.
  12. Standard side tension formed clamp bars and 1/2" crown bar rubbers.

1/4" PLATE UNDER SCREEN HOPPER WITH WEAR STRIPS AND ADJUSTABLE 1/2"x6" WIPERS.

18" WALKWAYS BOTH SIDES OF SCREEN & BACK 48" PLATFORM,

SKYWALK FLOOR AND 3" TOE BOARDS, 42" SOLID HANDRAILS WITH ACCESS LADDER.

48"x18' UNDER SCREEN CONVEYOR:

  1. 7.5 HP TEFC Motor.
  2. Vulcanized lagged head pulley and winged type self cleaning tail pulley.
  3. 2 ply 3/16"x1/16" belting.
  4.  

150 KW PERKINS GENERATOR SET

  1. Safety shut down system.
  2. Heavy duty motor mount.
  3. Maintenance walkway with handrails and ladders.
  4. Radiator protection.
  5. Top weather hood cover.
  6. Heavy duty air cleaners.
  7. 125 gallon diesel fuel tank.

MOTOR CONTROL CENTER

  1. 400 amp main breaker.
  2. NEMA 4 enclosure.
  3. Start/Stop buttons on door.
  4. 110 volt step down transformer with two receptacles.
  5. 30 HP Yaskawa variable frequency controller for the VGF.
  6. Starters: All on-plant required starters plus (3) off-plant 15 HP conveyors, and (1) 20 HP radial stacker with 5 HP power raise and 2 HP reversing radial drive.

RADIO REMOTE CONTROL

  1. Start/Stop for the VGF.
  2. Variable speed control for the VGF.
  3. Raise/Lower of the hydraulic dump grizzly.
  4. Emergency plant shutdown.

TANDEM AXLE CARRIER 18" WF BEAMS 50#

  1. Hutch 9700 series equalizing suspension; 61" centers and 10' wide axle.
  2. 22,500# Standard forge axles.
  3. 11:00x22.5 Tires, ten hole Budd Wheels.
  4. Standard 5th wheel plate, lights, & mud flaps.
  5. six ground support stands with jacking legs.

HYDRAULIC STABILIZING SYSTEM

  1. (2) 70,000# capacity front mounted hydraulic lift cylinders with foot pads.
  2. 12 volt hydraulic power package.

SAFETY GUARDS PROVIDED.

RUST INHIBITOR PRIMER AND TWO FINISH COATS OF PAINT.

 

TRAVEL AND OPERATING HEIGHT 14' 7", WIDTH 10'6".

AXLE WEIGHT - 44,500#.

PIN WEIGHT - 24,000#.

TOTAL WEIGHT- 48,500#.

F.O.B.: Phoenix, AZ

View a movie clip of the working machine after pictures.

Picture I - In Operation


Arizona Construction Equipment,Inc. - 1(602)-257-0802
Picture II - In Operation


Arizona Construction Equipment,Inc. - 1(602)-257-0802
Picture III - In Operation


Arizona Construction Equipment,Inc. - 1(602)-257-0802
Picture IV - In Operation


Arizona Construction Equipment,Inc. - 1(602)-257-0802