Price On Request

Fab Tec Pro Wash Master 5'x16' Portable Plant
- 10 CY Hopper, Belt Feeder, 150KW Generator & Electrical Switchgear

Fab Tec Sales Brochure After Pictures.

PRO 5'X16' 3-Deck Incline Screen:
- 20 HP TEFC with pivot motor base and power and belt.
- 2" top deck, 7/8" middle deck, 3/8" bottom deck screen cloth.
- 3/8" PL side walls, with 2"x3" angle iron reinforcement on edges.
- Hutch bolted screen decks, constructed of 4"x3"x3/8" angle iron and 3"x2" rectangular tubing, 1/2"x3" FB crown bars.
- AR lined discharge lips.
- Alco high temper isolation springs.
- 100 MM Torrington spherical bearings specially designed for shaker screens.
- Center support tube 9" with 1/2" wall and 2" thick flanges.
- Fab Tec designed cartilage style bearing housings, very heavy duty with 1 1/4" wall thickness.
- Eccentrics with add on weights.
- 10" WF sub frame 33# with 8" CL 13.75# cross members.
- Standard side tension formed clamp bars and 1/2" crown bar rubbers.
- Hydraulic raising and lowering of the screen to operating and travel position.

TRIO 36"x25' Fine Material Washer:
- 15 HP TEFC Toshiba Motor.
- Greasable lower bearing, rubber sealed with bearing spacer for trouble free use.
- Extra thick replaceable wear plates, tube & sprial.
- 7 5/8" outside diameter overflow outlet pipe.
- 100 TPH 3/8" maximum material size 3/8".

10 Cubic Yard Feed Hopper with 1/4" Bolt-on AR Liners 30"x10' Variable Speed Belt Feeder:
- 10 HP TEFC Motor.
- 47 FPM belt speed, weighted feed gate.
- Belt drive is high torque with double reduction for proper speed.
- Vulcanized lagged head pulley and winged type self cleaning tail pulley with Dodge SCM bearings.
- 3 ply 1/4"x1/16" belting.
- CEMA C idlers.
- Variable frequency drive.

30"x38' Screen Feed Conveyor:
- 10 HP TEFC Motor.
- Vulcanized lagged head pulley and winged type self cleaning tail pulley with Dodge SCM bearings.
- 3 ply 3/16"x1/16" belting.
- Hydraulic raising and lowering of the conveyor to operating and travel position.

Power Package:
- Perkins 4 cylinder diesel engine.
- Newage 150 KW Continuous power generator.
- 120 Gallon diesel fuel tank.
- Plant mounted NEMA 12 enclosure switch gear (ABB IEC starters) with stop/start buttons.
- Start-up warning horn system.
- Extra auxiliary starters for up to three 15 HP stockpiling conveyors and one 25 HP power radial stacker.
- Extra starter for 25 HP water pump motor; pump not included.

Three (3) AR Lined Discharge Chutes with Easy Access to Product Conveyor.

Twelve (12) Spray Bar Wash System:
- Brass "Vee Jet" nozzles, 1 1/2" spray bars.
- Brass individual gate valves for each spray bars.
- Full length water mainfold with 4" inlet pipe and flange.
- Maximum capacity 657 GPM at 60 PSI.
- Slurry feed box at the end of the feed conveyor with water jets.
- Hydraulic raising & lowering of the slurry feed box.

18" Walkways both Sides of Screen & Back 48" Platform.

Skywalk Floor and 3" Toe Boards, 42" Solid Handrails with Access Ladder.

Triple Axle Carrier 16" WF Beams 50#
- Hutch 9700 series suspension.
- 22,500# Standard forge axles.
- 11:00x22.5 Tires, ten hole Budd Wheels.
- Standard 5th wheel plate, lights, & mud flaps.
- Hydraulic Leveling.
- 16" leg extensions for additional blocking when needed.

Safety Guards Provided. Local Regulations May Require Additional Guards.
Rust Inhibitor Primer and Two Finish Coats of Paint.

Dimensions:
- Travel Height: 14'6"
- Operating Height: 18' 7-1/16"
- Width: 11'
- Length: 60' 5"
- Axle Weight: 42,760 Lbs.
- Pin Weight: 27,000 Lbs.
- Total Weight: 69,760 Lbs.

* All transactions on approved credit.

For pricing and availability please contact Arizona Construction Equipment, Inc.

View Factory Specifications