- Jaw Plants
- Cone Plants
- Wash Plants
- Screen Plants
- ProScreen & Pro Mighty Mite
- Wash Plant & Pro Wash Master
- Screen Plants & Incline Screens
- Vibrating Grizzly Feeders
- Contractor & Sprint Plants
- Agg Prep Plant
- Belt Feeders
- Load-Out Bunkers, Cold Feeders & Pugmills
- Radial Stackers & Conveyors
- Hydraulic Stabilizing Systems
Pro Wash Master
Tandem Axle Carrier, 21″ WF 57 lbs Beams:
- Hutch 9700 equalizing suspension.
- 11:00Rx22.5 Tires, 10 hole hub piloted wheels.
- Standard forge 22,500 axles, air brakes, lights and mud flaps.
- Six ground support stands with jacking legs.
5’x16′ Pro Incline 3 Deck Screen, 20 HP TEFC:
- Huck bolted screen box, 3/8″ plate side walls.
- 100 MM F.A.G. spherical bearings, 4150 stress proof shaft, steel machined cartridge type bearing housings with 1 1/4″ wall thickness.
- Adjustable throw.
36″x25′ Sandscrew:
- 15 HP TEFC.
- Greasable lower bearing, rubber sealed with bearing spacer for trouble free use.
- Extra thick replaceable wear plates tube & spiral.
- 100 TPH 3/8″ maximum material size 3/8″.
Ten (10) Spray Bar Wash System
- Brass “Vee Jet” nozzles, 12″ spray bars.
- Brass individual gate valves for each spray bars.
- Full length water manifold with inlet pipe and flange.
- Maximum capacity 657 GPM at 40 PSI.
20″ Walkways Both Sides of Screen & Back 48″ Platform, Skywalk Floor and 3″ Toe Boards, 42″ Handrails with Access Ladder.
Three (3) AR Lined Discharge Chutes with Easy Access to Product Conveyors.
10 Cubic Yard Feed Hopper with Option of Heavy Duty Hydraulic Dump Grizzly.
30″x38′ Feed Conveyor:
- 3 Ply belt
- 36″ spacing on 35 degree idlers.
- Vulcanized lagged head pulley, self cleaning wing tail pulley, Dodge SCM bearings.
- Motorized drive pulley.
30″x10′ Belt Feeder 10 hp TEFC:
- Belt speed 47 FPM, weighted feed gate.
- Belt drive has double reduction for proper speed, and high torque.
- Vulcanized lagged head pulley, self cleaning wing tail pulley
- Dodge SCM bearings.
- 3 Ply belt
- 12″ spacing on Cema C carrier rollers.
Rust Inhibitor Primer and Two Finish Coats.
Options:
- Hydraulic Dump Grizzly 6″ Opening and Manual Spool Valve
- Hydraulic lift for feed conveyor, screen, and slurry box
- 1/4″ AR liner in hopper (bolt-in)
- Slurry box
- Cross conveyors
- Vulcanize splice belt
Self Contain Options:
- Perkin 150 kw Generator Set, Heavy Duty Radiator and Air Cleaners.
- 110 Gallon Diesel Tank.
- Plant Mounted Switch Gear in NEMA 12 Enclosure, Start and Stop Buttons on Door, and Fire Up Warning Horn System.
- Extra Starters for Outside Conveyors.